The MO1202 is a standard bidirectional node in low profile housing. The construction makes configuration and use
very easy, parallel the expenses will be lowered too. The node provides GaN output stage and optionally CWDM
return path transmitter. 

• Downstream frequency range up to 1218 MHz
• Upstream frequency range up to 204 MHz
• Optional connection to Monitoring System
• Optional GaN output stage
• Optional CWDM return path
• Automatic optical gain control
• Automatic ingress management by the RSW module

TECHNICAL SPECIFICATIONS___________________________________________________________
Forward path parameters
Wavelength [nm] 1100…1650
Input optical power [dBm] -5…+3
Equivalent input noise current [pA/√Hz] 6
Frequency range [MHz] 47...1218
Equalizer breakpoint frequency [MHz] 862, 1006, 1218 (1)
Gain limited output RF level at 2.5% OMI/channel [dBµV] 120±1
Flatness [dB] ±0.7
Output return loss (40MHz -1.5dB/octave) [dB] >18
Input RF testpoint level at 2.5% OMI/channel [dBµV] 86±1
Output RF testpoint attenuation [dB] 30±1
CTB [dB] -72 (2)
CSO [dB] -70 (2)
Noise-to-power ratio (NPR) maximum / Dynamic range of NPR > 42 [dB] >46 / 36 (3) (4)

Reverse path parameters
Output optical power [mW] 2, 4 (3, 6 dBm) (5)
Wavelength [nm] 1310 DFB, 1270...1610 CWDM
Frequency range [MHz] 5...204
Diplex filter [MHz] 65/85, 85/105, 204/258
RF input level (10% OMI/channel) [dBµV] 70±1
Flatness [dB] ±0.5
Input return loss (40MHz -1.5dB/octave) [dB] >18
Ingress control switch (RSW) states 0dB/-6dB/-50dB/HPF20
Noise-to-power ratio (NPR) maximum / Dynamic range of NPR > 36 [dB] 45 / 9 (6)

General parameters
RF connector 5/8”
Optical connector SC/APC, EURO2000
Power supply voltage [VAC] 30...65; 35...90
Maximum power consumption [W] 40
Maximum current feed-through [A] 10
Hum modulation [dB] 70
Screening factor [dB] 80
Degree of protection IP65
Temperature range [°C] -20…+50
Dimensions [mm] 275x200x175
Weight [kg] 3.9